Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 9)

9
Setup
Preparing for Use
The Impact Digital Monolight includes a preinstalled
flash tube. Be careful not to touch the flash tube
with your bare hands, since this could cause
damage to it. Use cotton gloves or a soft, dry cloth
when touching or handling the flash tube. See
Installation and Replacement Guide on page 23.
Remove the protective cap before plugging in or
powering on the unit. Push back the mount release,
turn the cap counterclockwise, and pull the cap
from the mount.
Attach the reflector by aligning the lugs and making
sure the umbrella hole is on the bottom. Push back
the mount release, fully insert the reflector, and turn
it clockwise. You’ll hear it click into place.