Kodak PIXPRO SP360 4K Action Camera Dual Pro Pack - Manual (Page 58)

57
Flat Adhesive Mount: For tacking onto a skateboard or other flat
objects
Installation method:
There are two types of adhesive mounts: flat and curved. You may select based on the shape of the object to be used.
Both types can be assembled in the same way:
1. Assemble the standard housing (or the waterproof housing) (
55/56).
2. Fasten the standard housing (or the waterproof housing), install adhesive mounts according to the diagram, and use the setscrew to tighten.
3. Tack the double-sided adhesive at the bottom of the adhesive mount to the object to be used.
The double-sided adhesive is disposable. It should be replaced by a new one after being peeled off.
Curved Adhesive Mount: For tacking onto a helmet or other curved
objects
Double-sided adhesive