Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit - Manual (Page 27)

27
Preparing the Power Supply
Connecting the CA-A10 AC Adapter
1 Set the Q switch to OFF.
2 Connect the AC adapter’s DC plug to the DC IN
terminal on the camera.
• Align the cable so the red dot on the plug is facing
up.
• To disconnect the AC adapter, pull back the
metallic tip of the plug and then disconnect the
cable from the terminal.
3 Connect the power cord to the AC adapter and plug
it into a power outlet.
IMPORTANT
• Make sure to turn off the camera before connecting
or disconnecting the AC adapter.
• When using the AC adapter, do not fix it permanently
to one place as this may cause a malfunction.
Turning the Camera On and Off
The camera has two operating modes: CAMERA ( ) mode for making recordings and MEDIA ( )
mode for playing back recordings. Select the operating mode using the Q switch.
To turn on the camera
Set the Q switch to CAMERA for mode or
MEDIA for mode.
To turn off the camera
Set the Q switch to OFF.
CAMERA mode MEDIA mode
DC IN
terminal
AC adapter