Connector panel, Touch monitor connections – Elo TouchSystems 2403LM 24" Full HD Medical Touchscreen Monitor with TouchPro (Black, Includes Stand) User Manual
Page 6
User Manual ET1903LM, ET2203LM, ET2403LM, ET2703LM REVB
6
Connector Panel
Note: Cable tie-down points can be used to tie down the cables with tie wraps. Simply loop the tie wraps through the cable tie-down points and around
the cable to secure cable connections.
Touch Monitor Connections
1. Connect one end of the HDMI or VGA video cable to the monitor
’s HDMI/VGA input connector and the other end to your HDMI/VGA video source. (Tighten the
video cable’s screws on the VGA connector for best performance.)
2.
Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port. (Optional RS232 serial touch connection via option Y-cable
E810917, this Y-cable can also connect as the VGA video source)
3.
Connect the audio cable between the monitor’s Audio Out and your audio source.
4.
Connect the power adaptor’s input connector to the power source. Connect the power adaptor’s DC output connector to the monitor’s input power jack.
5. The touch monitor ships in an OFF state. Press the power button to turn it on.