AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 35)

30
3.1 Turning on the Power
1 Plug the power cord to a power
outlet or power supply.
2 Press the button to turn the
LCD display on.
When the LCD display is
turned on, press the button
to turn off the LCD display.
Note:
♦ The LCD display still consumes
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
POWER button
3.1.1 Initial Setup
After you turn on the LCD display, a Welcome screen opens. Then do
the following:
1 Select the default OSD language.
2 Select the method to perfom the initial setup. Then select
Next to continue.
CHAPTER 3: USING THE LCD DISPLAY