Epson 2500 - Manual (Page 149)

Solving Problems 143
Solving Problems with Scanning and
Copying
You can print, but you aren’t able to scan.
If you’re using a parallel port, make sure you’ve connected the
EPSON Stylus Scan to LPT1. Your scanner won’t work if
you’re using LPT2.
Your EPSON Stylus Scan software doesn’t work
properly.
■ If you’re running other software at the same time, using
memory resident programs, or using many device drivers,
the computer may not have enough memory. Also, if you’re
scanning a large image or scanning at a high resolution,
your computer may not have enough memory to process
the image. Try closing other applications or increasing your
system’s memory (RAM).
■ If you’re using the EPSON TWAIN software, make sure
you select
EPSON Stylus Scan FB as your TWAIN
source.
■ Make sure your EPSON Stylus Scan is turned on, and that
the interface cable is securely connected at both ends.
■ Try restarting your computer. Make sure you turn on the
EPSON Stylus Scan before you turn on your computer.