Epson 2500 User Manual

Page 152

Advertising
background image

146

Solving Problems

You see vertical banding or misalignment.

■

Make sure the print head nozzles are not clogged. To run a
cleaning cycle, see “Cleaning the Print Head” on page 126.

■

Run the Print Head Alignment utility. See “Aligning the
Print Head” on page 129 for instructions.

■

Make sure the printable side of the paper is face up. It is
usually whiter or shinier.

■

Don’t use the

High Speed

setting in the printer software.

■

Set the paper thickness switch to the

0

position.

■

Place the EPSON Stylus Scan on a stable, level surface.
Make sure none of the five rubber feet is missing from the
bottom.

paper thickness switch

Advertising
See also other documents in the category Epson Printers: