Epson 2500 - Manual (Page 164)

158 Notices
Macintosh System Requirements
■ iMac series or Power Macintosh ® G3 or later with a
built-in USB port
■ Mac OS 8.1 or later (8.5 or later recommended)
■ At least 32MB of available memory (64MB recommended)
■ At least 50MB of free hard drive space (100MB
recommended)
■ VGA or better monitor (24-bit color recommended)
■ Double-speed (2 x ) CD-ROM drive (quad-speed [4 x ] or
faster recommended) for installing the software
■ Available USB port or hub connection, with shielded USB
“AB” interface cable, from Series A (computer) to Series B
(EPSON Stylus Scan), up to 6.5 feet (2 m) long
If you have an iMac, you may need to update your operating
system before installing your printer software:
■ If you’re running OS 8.1, you must install iMac
Update 1.0
■ If you’re running OS 8.5 or 8.5.1, Apple recommends that
you install iMac Update 1.1
Download the update for your system from Apple at
http://asu.info.apple.com. Contact Apple if you have problems
installing an update.
To find out which operating system your iMac is running,
select
About This Computer from the Apple menu.
caution:
Using an improperly
shielded USB cable—
especially a cable more
than 6.5 feet (2 meters)
long—may cause the
EPSON Stylus Scan to
malfunction.