Epson 2500 - Manual (Page 150)

144 Solving Problems
You see one of these messages: Cannot find the scanner
on the bus (Macintosh) or Scanner not ready
(Windows).
■ Make sure your EPSON Stylus Scan is turned on and
securely connected to your computer or USB hub.
■ If your EPSON Stylus Scan is connected to a USB hub,
make sure it’s connected to a first tier hub. The first tier
hub is the one closest to the host computer, if more than
one hub is connected to the computer.
■ If you’re copying, make sure SS 2500 is selected in the
Chooser (Macintosh).
■ If you’re using the EPSON TWAIN software, make sure
you select
EPSON Stylus Scan FB as your TWAIN
source.
■ Try restarting your computer. Make sure you turn on the
EPSON Stylus Scan before you turn on your computer.
When you try to copy on a Macintosh, your original is
scanned but not printed.
Open the Chooser, select SS 2500 , and turn on background
printing. Then try copying again.