DJI Avata Explorer Combo FPV Drone with Goggles Integra - Manual (Page 13)

DJI Goggles Integra Motion Combo User Manual
© 2023 DJI All Rights Reserved.
13
Power Button
The table below shows the battery level LED status during charging.
LEDs Battery Level
1%-50%
51%-75%
76%-99%
100%
Preparing the Motion Controller
Press the power button once to check the current battery level.
Press, and then press and hold the power button to power on the motion controller.
The battery level LEDs display the power level of the battery during charging and dis-
charging. The statuses of the LEDs are defined below:
LED is on.
LED is flashing.
LED is off.
LEDs Battery Level
81%-100%
76%-80%
64%-75%
51%-63%
26%-50%
16%-25%
9%-15%
1%-8%
Battery Level LEDs