DJI Avata Explorer Combo FPV Drone with Goggles Integra - Manual (Page 24)

DJI Goggles Integra Motion Combo User Manual
24 © 2023 DJI All Rights Reserved.
Control
a) Configure remote controller-related functions, such as setting the stick mode,
customizable buttons, and calibrating the IMU and compass.
b) Calibrate the motion controller, or view the tutorial video.
c) Calibrate the gimbal, adjust the gimbal tilt speed, set the unit, or use the turtle
mode to flip the overturned aircraft upright (only certain aircraft support the tur-
tle mode).
d) View the goggles tutorial.
Camera
a) Set the aspect ratio, video quality, video format, gridlines, storage device, or for-
mat the microSD card.
Data cannot be recovered after formatting. Operate with caution.
b) Advanced Camera Settings:
Set the recording device, color, and anti-flicker, enable or disable auto record
at takeoff, as well as enable or disable video subtitles.
Camera View Recording (enabled by default): if disabled, the recording of the
goggles screen will not include the OSD elements.
c) Select Reset Camera Parameters to restore all camera settings to default.
Display
Adjust screen brightness, zoom, display or hide the Home Point, and disable the
screen masking function.
About
a) View device information, such as the serial number, the firmware of the goggles,
and linked devices.
b) Set the system language.
c) View the compliance information.
d) Reset the goggles and the linked devices to their default settings.