Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 179)

– 179 –
Chapter 11 Specifications — Specifications
<SDI OUT 1> to <SDI OUT 16>
terminals
During Standard mode
16 lines (two distribute outputs per line)
f Connectors: BNC × 32
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2,
DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to
AUX16 can be assigned.
HD-SDI HD serial digital, SMPTE292M (BTA S-004) standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: Less than 270 ps (HD)
f Fall time: Less than 270 ps (HD)
f Difference between rise time and fall time: 100 ps or less (HD)
f Alignment jitter: 0.2 UI (130 ps) or less (HD)
f Timing jitter: 1.0 UI or less (HD)
f Eye aperture ratio: 90% or more
f DC offset: 0±0.5 V
SD-SDI SD serial digital, SMPTE259M standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: 1.5 ns or less
f Fall time: 1.5 ns or less
f Difference between rise time and fall time: 0.5 ns or less
f Jitter: 0.2 UI or less
During 3G mode
3G-SDI output: Eight lines (two distribute outputs per line)
HD-SDI output: Two lines (two distribute outputs per line)
f Connector
3G-SDI: BNC
× 16(odd numbered terminals only)
HD-SDI: BNC × 4 (<SDI OUT 14> and <SDI OUT 16> terminals only)
f 3G-SDI signal is not output from the even numbered terminals.
- No signal is output from the <SDI OUT 2>, <SDI OUT 4> ... <SDI OUT 12> terminals.
- The HD-SDI signal converted to the 1080i format is output from the <SDI OUT 14> and <SDI OUT 16> terminals. This
signal is converted to the 1080i format by decimating the 1080p signal output from the <SDI OUT 13> and <SDI OUT
15> terminals.
f <SDI OUT 13> and <SDI OUT 15> terminals are equipped with color correctors. The same color corrector setting is also
applied to <SDI OUT 14> and <SDI OUT 16> terminals.
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1,
DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned.
During 4K mode
4K signal output: Three lines (two distribute outputs per line)
2K signal output: Two lines (two distribute outputs per line)
f Connector
3G-SDI (for 4K signal): BNC
× 24 (terminal number 1 to 12)
3G-SDI (for 2K signal): BNC × 4 (terminal number 13 and 15)
HD-SDI (for 2K signal): BNC × 4 (terminal number 14 and 16)
f The 4K signal is output in SQD format.
f The HD-SDI signal converted to the 1080i format is output from the <SDI OUT 14> and <SDI OUT 16> terminals.
This signal is converted to the 1080i format by decimating the 1080p signal output from the <SDI OUT 13> and <SDI
OUT 15> terminals.
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1,
DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned.
3G-SDI 3G serial digital, SMPTE424M standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: 135 ps or less
f Fall time: 135 ps or less
f Difference between rise time and fall time: 50 ps or less
f Alignment jitter: 0.3 UI or less
f Timing jitter: 2.0 UI or less
f DC offset: 0±0.5 V
f 3G-SDI Level B
Signal formats SD 480/59.94i, 576/50i
HD 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/29.97PsF, 1080/25PsF,
1080/24PsF, 1080/23.98PsF
3G 1080/59.94p, 1080/50p
4K 2160/59.94p, 2160/50p
Signal processing Y:P
B
:P
R
4:2:2 10 bits
R:G:B 4:4:4 8 bits
ME number 2ME