Features, Top panel – ION Audio Projector Max HD Full HD Portable Projector and Bluetooth Speaker User Manual
Page 4
4
Features
Top Panel
1.
Power Button:
After powering on Projector Max
™
HD (via the
Power Switch
on the side panel),
press this button in order to enter or exit standby mode. In standby mode, Projector Max HD will
not be fully turned off but it will save battery life.
Note:
When Projector Max
™
HD is out of standby mode and fully powered on, the speaker will
work, but you will need to use the
Projector On/Off button
to turn on the projector.
2.
Projector On/Off:
Press this button to turn the projector on or off.
Tip:
This feature can be useful for saving battery life. If you are only using Projector Max
™
HD to
listen to music from a Bluetooth or auxiliary device, use this button to turn the projector off and
save Projector Max
™
HD’s battery.
3.
Bluetooth Button:
Press and hold this button to make Projector Max
™
HD unpair from a
connected Bluetooth device and automatically search for another Bluetooth device to pair with.
The
Bluetooth button
is only for unpairing connected Bluetooth devices, since Projector Max
HD is always in pairing mode.
4.
Echo Button:
Use this button to turn the
Mic Inputs
echo effect on or off.
5.
Menu Button:
Press this button to access the projector’s picture settings. Then use the
Arrow
buttons
and
OK button
on the
Navigation Pad
to adjust the settings.
6.
Home Button:
Press this button to go to the projector’s main menu.
7.
Return:
When using the projector, press this button to go back one page.
8.
Navigation Pad:
Use the buttons here to navigate pages and select/adjust settings for your
projector. Use the
Arrow buttons
to highlight/edit different options and the
OK button
to make
a selection.
9.
Status LEDs:
From left to right, these four LEDs are the:
•
Standby LED:
This LED will be off when Projector Max
™
HD is powered off, lit red when
Projector Max
™
HD is powered on, and lit green when Projector Max
™
HD is powered on but
in standby mode.
•
Bluetooth LED:
This LED will be lit blue when Projector Max
™
HD is paired with a Bluetooth
audio source.
•
Echo LED:
This LED will be lit red when the mic echo effect is turned on.
•
Battery LED:
This LED will blink red when Projector Max
™
HD has a low battery. It will be lit
solid when Projector Max
™
HD is connected to power and charging (solid red when the unit
is still charging; green when the unit is fully charged).
10.
Volume:
Press and release the
+
and
-
buttons to adjust the overall output volume of the
loudspeaker.
11.
Mic Volume:
Press and release the
+
and
-
buttons to adjust the input volume of the
Mic Inputs
.
3
1
2
4
5
7
8
9
9
10
11