Settings – BenQ TH575 3800-Lumen Full HD DLP Home Theater Gaming Projector User Manual
Page 33
33
Menu operation
Settings
HDMI Format
Selects a suitable color format to optimize display quality.
•
Auto
: Automatically selects a suitable color space and gray level for the incoming
HDMI signal.
•
RGB Limited
: Utilizes the Limited range RGB 16-235.
• RGB Full
: Utilizes the Full range RGB 0-255.
•
YUV Limited
: Utilizes the Limited range YUV 16-235.
Reset Display
Returns all of the adjustments you’ve made for the
Display
menu to the factory
preset values.
Projector
Installation
See
Choosing a location on page 12
Auto Source
Search
Allows the projector to automatically search for a signal.
Light Settings
•
Reset Light Timer
Resetting the Light timer (FOR SERVICE PERSONNEL
.
•
Light Usage Time
: Displays the number of hours the lamp has been used.
Operation
Settings
Quick Cooling
:
Selecting
On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 15 seconds.
Reminder Message
Sets the reminder messages on or off.
High Altitude Mode
We recommend you use the
High Altitude Mode
when your environment is
between 1500 m –3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "
High Altitude Mode
" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your projector
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
Do not use the
High Altitude Mode
if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.