Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 148)

Using the Projector on a Network
148
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Network Setting” (
P144 ).
Item Explanation Factory default setting
Error report Select whether to turn the error mail
sending function on or off. OFF
To: Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 - 63 characters). MailUserAccount
Cc: Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 - 63 characters). <Blank>
From: Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 - 63 characters). [email protected]
SMTP server IP address Enter the SMTP server IP address in 1-
byte numbers.
0.0.0.0
SMTP server port
number Enter the SMTP server port number in 1-
byte numbers (1 - 65535). 25
SNTP server IP address Enter the SNTP server IP address in 1-
byte numbers. 0.0.0.0
Time zone Select the time zone where the
projector is used. (GMT) Dublin, Lisbon,
London
Mail resend interval* Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers. 10