Dell 23.8" OptiPlex 7410 All-in-One Desktop Computer (Gray) - Manual (Page 42)

Steps
1. Align the back cover to the display-assembly base.
2. Place and slide the back cover into place on the display assembly base.
NOTE: Ensure that the tab on the back cover is secured in the slot on the display-assembly base.
Next steps
1. Install the stand .
2. Follow the procedure in After working inside your computer .
Memory
Removing the memory
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
About this task
The following image(s) indicate the location of the memory and provides a visual representation of the removal procedure.
42 Removing and installing Customer Replaceable Units (CRUs)