Overloud Gem Comp76 FET Compressor and Limiter Plug-In - Manual (Page 18)

OVERLOUD GEMS EQ84
HIGH PASS - Sets the high pass frequency from 45 Hz to 360 Hz, cutting o ff lower frequencies with
a 18 dB per octave slope fi lter. The BY button bypasses the fi lter.
LOW PASS - Sets the low pass frequency from 6 kHz to 18 kHz, cutting o ff higher frequencies with
an 18 dB per octave slope fi lter. The BY button bypasses the fi lter.
PHASE - Inverts the phase of the output by 180°.
EQL - Includes/excludes the EQ section from the audio processing. When excluded, all EQ fi lters
will be bypassed, but the mic-pre transformer and saturation will still be present (if the Mic range
is selected with the input gain control), or if it is set to Line range, it still gives slight color to the
processed sound. To completely bypass the plugin you can turn it o
ff with the bypass control on
the left corner of the top bar.
OUTPUT - Adjusts the output level ranging from 16 dB to +16 dB with central zero.
16