Overloud Gem Comp76 FET Compressor and Limiter Plug-In - Manual (Page 44)

OVERLOUD GEMS
ENSEMBLE
The ENSEMBLE unit replicates the modulation stage of a vintage instrument which originally only
could be turned on or o ff with a switch button. Following the GEMS philosophy, the original mod-
ulation processing can be customized by adjusting Modula parameters.
For a description of all ENSEMBLE parameters you can refer to the DIMENSION ones described
above.
SYMPHONIC
The SYMPHONIC unit replicates the processing of a modulation preset inside a popular and very
appreciated Japanese vintage analog-digital multi e ff ect unit. The Symphonic preset of the orig-
inal unit sounded like a fl anger by modulating the input signal with its LFO. This kind of modula-
tion is particularly suitable for keyboard instruments whose sound gets thicken and waving with
the added pitch and stereo imaging variations.
MASTER
The MASTER section includes controls to select the model of the modulation: DIMENSION , ENSEMBLE ,
SYMPHONIC . And other controls to fi nalize the processed sound.
IN LEVEL - Adjusts the level of the input signal.
EQ GAIN 1 - Adjusts the gain of the EQ band 1 frequency.
EQ FREQ 1 - Selects the frequency of the EQ band 1.
EQ Q 1 - Adjusts the Q of the EQ band 1.
EQ GAIN 2 - Adjusts the gain of the EQ band 2 frequency.
EQ FREQ 2 - Selects the frequency of the EQ band 2.
EQ Q 2 - Adjusts the Q of the EQ band 2.
EQ - Turns the EQ on / o ff (bypass).
LFO - Adjusts the randomness of the LFO. Can be used to reduce the typical e ff ect of cyclicality
perceived when LFOs are used.
DUAL - Doubles the modulation panel to have both processing the stereo channels individually.
STEREO WIDTH - Controls the stereo image aperture by narrowing (turn left) or widening (turn
right) the stereo channels separation.
MIX -Adjusts the mix between DRY (input) and WET (processed) signals.
OUT LEVEL - Adjusts the level of the output signal.
42