AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) - Manual (Page 75)

KONA Capture, Display, Convert v15.5 75 www.aja.com
HDMI Screen in 8K Mode (KONA 5 only)
Figure 40. AJA Control Panel, KONA 5 HDMI Screen in 8K Mode
Select
Configures the KONA 5's HDMI output signal. Select from:
• Auto
• Device Format
• Quadrant 1
• Quadrant 2
• Quadrant 3
• Quadrant 4
NOTE: The SDI Output Screen settings affects the KONA 5's HDMI output signal.
• Quadrant - With this SDI Output setting, the HDMI output displays one of the
image quadrants, user selectable.
• 2SI - With this SDI Output setting, the HDMI output displays a down-sampled
image of the full raster.
Additional Information
The following information may apply to all the KONA products covered in this
manual.