RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface - Manual (Page 31)

User's Guide Fireface UCX II © RME
31
14. Configuring the Fireface UCX II
14.1 Settings Dialog
Configuring the Fireface is done via its own settings dialog. Start the program
Fireface USB
Settings . The mixer of the Fireface UCX II (TotalMix FX) can be configured by starting the pro-
gram Totalmix .
The Fireface’s hardware offers a number of helpful, practical functions and options to suit many
different requirements. The following is available in the 'Settings' dialog:

Operation of the DSP

Configuration of digital I/Os

Current sample rate

Synchronization behaviour

State of input and output
Any changes performed in the
Settings dialog are applied imme-
diately - confirmation (e.g. by exit-
ing the dialog) is not required.
However, settings should not be
changed during playback or record
if it can be avoided, as this can
cause unwanted noises.
Use the drop down menu
Proper-
ties For to select the unit to be
configured.
On the right of it the current firm-
ware and driver version of the
Fireface UCX II is shown.
Input Options
Word Clock Input
This option switches the BNC
socket into word clock input mode
Word Clock - Termination
Checking this option terminates
the word clock input internally with 75 Ohms.
DSP – Record EQ+D
Switches EQ and Dynamics of all input channels into the recording path. In case Loopback has
been activated the EQ and Dynamics of the Output channel are within the recording path. See
also chapter 27.6.