Elation Professional Elation SIXBAR 1000 IP WMG RGBAW+UV LED Batten Fixture (White Marine Grade Finish) - Manual (Page 4)

w w w . e l a t i o n l i g h t i n g . c o m
4
G E N E R A L I N F O R M A T I O N
INTRODUCTION
Congratulations, you have just purchased one of the most innovative and
reliable lighting fixtures on the market today! This fixture has been designed to
perform reliably for years when the guidelines in this booklet are followed. Please
read and understand the instructions in this manual carefully and thoroughly
before attempting to operate this unit. These instructions contain important
information regarding safety during use and maintenance.
IP65 RATED
An IP rated lighting fixture is one, which is commonly installed in outdoor
environments and has been designed with an enclosure that effectively protects
the ingress (entry) of external foreign objects such as dust and water. The
International Protection (IP) rating system is commonly expressed as "IP" (Ingress
Protection) followed by two numbers (i.e. IP65) where the numbers define the
degree of protection. The first digit (Foreign Bodies Protection) indicates the
extent of protection against particles entering the fixture and the second digit
(Water Protection) indicates the extent of protection against water entering the
fixture. An IP65 rated lighting fixture is one, which has been designed and tested
to protect against the ingress of dust (6) and low-pressure water jets from any
direction (5).
M A R I N E / C O A S T A L E N V I R O N M E N T I N S T A L L A T I O N S !
Please note although this fixture is IP rated, the fixture is NOT suitable for marine
and/or coastal environment installations. Installing this fixture in a marine and/or
coastal environment may cause corrosion and/or excessive wear to the interior
and/or exterior components of the fixture. Damages and/or performance
issues resulting from installation in a marine and/or coastal environment will void
the manufactures warranty and will
NOT be subject to any warranty claims
and/or repairs.
Ensure ALL connections and end caps are properly sealed with a non-conductive
dielectric grease (available at most electrical suppliers) to prevent water
ingress/condensation and/or corrosion.
O P T I O N A L C O R R O S I O N - R E S I S T A N T C O A T I N G
Optional Corrosion-Resistant Coatings may be available for this fixture.
Please consult your
Elation Professional sales representative for details.