HiTi P525L Photo Printer - Manual (Page 7)

7
: When moving the printer, hold the bottom edge of the printer. It is strongly
recommended to handle the printer by one to two persons during the transportation.
: Please take caution when transporting the printer on the slippery floor.
: Please make sure the power is off and the power cord is removed from the
printer before transportation.
: In the cause of dropping the printer during transportation, contact HiTi dealers
or service center for inspection of the printer. Using the printer with possible damage
without proper inspection may cause fire or electric shock.
＊ Do not dismantle or remodel the printer. Some sections of the printer contain a high
voltage or become very hot. Ignoring this warning may cause electric shock, fire, or
burns.
: Secure the power cable firmly while using.
: The thermal head reached high temperature during operation but it is normal.
Do not touch the thermal head by any case. Touch the thermal head may cause person
injury or damage of the printer.
＊ Attention: Touching the surface of the thermal head directly may cause damage to the
thermal heat. Hard objects getting into the printer may cause the damage of printer or
result in malfunction. In such case, please do not use the printer while any obstacle
inside the printer.
: Do not attempt to service the printer beyond the instruction specified in this
document. In case of irrecoverable problem, please contact HiTi dealers or service center.