Explore Scientific Radio-Controlled Projection Clock with External Weather Sensor (Silver) - Manual (Page 38)

38
hold [ ] button, the setting will be saved and you
will exit the setting mode.
LANGUAGE
1. Press and hold [ ] button to enter time setting.
2. Press and hold [ ] button to confirm setting and
exit.
3. Language setting sequence: English (ENG) 
Spanish (SPA)  Italien (ITA)  French (FRE) 
German (GER)
4. Press [ ] button confirm setting and exit.
TIME ZONE SETTING
To set a different time zone, proceed as follows:
1. Press and hold [
] button to enter time setting.
2. The screen displays ZONE and the numbers start to
flash.
3. Press [+] button to increase or [–] button to decrease
the Time zone offset.
4. Press and hold [ ] button to confirm setting and
exit.
°C/°F SETTING
1. Press and hold [ ] button to enter time setting.
2. Press [ ] button several times until you reach the
Temperature unit setting.
3. Press [+] or [-] button to switch Celsius (°C) / Fahr-
enheit (°F).
4. Press and hold [ ] button to confirm setting and
exit.
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set two alarm times (AL1 and AL2).
1. Press and hold [
] button to enter alarm setting
mode.
2. The setting parameter will flash.
3. Press [+] or [-] button to set the desired data.
4. Press [
] button to confirm setting and enter to
next parameter.
5. Sequence of setting: Hour  Minute
6. Now press [+] or [-] to toggle Weekday alarm on or
off and press [ ] button to confirm.
The Alarm rings only on weekdays when the setting