Explore Scientific Radio-Controlled Projection Clock with External Weather Sensor (Silver) - Manual (Page 39)

IT
DE
EN
39
is ON.
7. Repeat step 2-4 for Alarm 2 setting.
8. Alarm will turn on automatically when alarm setting
is finished.
TURN ON/OFF ALARM
1. Press the [ ] button to turn on/off the alarm. The
sequence is: AL1 on  AL2 on  AL1+AL2 on 
AL1+AL2 off.
2. The AL1 default alarm time is 6:00 o’clock and the
AL2 default alarm time is 8:00 o’clock.
3. The alarm lasts 2 minutes and becomes faster and
faster over time.
OPERATION
1. At the set time, alarm signal rings.
2. During the alarm, press the [
] button
to delay the alarm by 8 minutes.
3. If you do not press any button to stop the alarm, it
will automatically turn off after 2 minutes.
4. To stop the alarm, press the [ ] button.
5. The alarm will start again at the next alarm time,
unless you switch off the alarm function by press-
ing the [
] button until the alarm is set to off.
WEATHER FORECAST
This device forecasts the next 6 hours of weather with-
in a 30-50 km (19-31 mile) radius.
SYMBOL DESCRIPTION
Sunny
Snowy
Cloudy
Rainy