Explore Scientific Radio-Controlled Projection Clock with External Weather Sensor (Silver) - Manual (Page 40)

40
TEMPERATURE
The indoor temperature is always displayed in the bot-
tom right corner of the screen. To receive outdoor tem-
perature you can connect up to 3 outdoor sensors to
the main unit.
Press the [ ] button to toggle between Channel 1-3
or to auto-loop between the Channels.
NOTE: When the indoor temperature is lower than -5 °C
(23.0 °F), the screen displays LL.L. When the tempera-
ture is higher than 50 °C (122.0 °F), the screen displays
HH.H.
PROJECTION
The projector displays the time on your ceiling or wall
and it can rotate 180°. It is easier to view in a darkened
room. For the optimal projection results, place the unit
within 1.5 - 2 m (5-6.5 ft) from the ceiling or wall.
1. Press the [ ] button to activate the
Projection for 5 seconds.
2. Press the [ ] button when the projec-
tion is on to flip the projection display 180°.
3. Press and hold the [ ] button to ac-
tivate/deactivate continous projection (only with
AC/DC adapter).