Lenovo Legion Go Handheld Gaming System - Manual (Page 14)

• Display devices
Note: When you connect the tablet to display devices, you need to use appropriate cables and adapters
(if needed) according to the connection capabilities of the display device.
• Thunderbolt ™ -enabled docks or devices
microSD card slot
The microSD card slot is used to insert a microSD, microSDHC, microSDXC, or microSDUC memory card to
transfer data between the memory card and your console.
Air vents (outlet)
The air vents allow hot air to be discharged out of the tablet.
Important: When the tablet is operating, do not place it on a bed, sofa, carpet, or other flexible surfaces.
Otherwise, the air vents will be blocked and the tablet may overheat, reducing performance or causing the
tablet to be unresponsive or even shut down.
Combo audio jack
The combo audio jack is used to connect single-plug headsets, headphones, or external speakers.
Power button
Press the power button to turn on your console.
Note: By default, on a Windows product, pressing the power button when the product is turned on will put it
into sleep mode.
Power light
The power light indicates the tablet's current power state when it is not connected to the ac power adapter:
powered off, in sleep mode, or in hibernation mode.
Table 10. Power light status and description
Light status Power state Battery charge level
White (Blinking slowly) In sleep mode 91%–100%
Amber (Blinking slowly) In sleep mode 1%–90%
Off Powered off or in hibernation mode /
The color of the power light can indicate the tablet's active thermal mode when it is powered on.
Table 11. Power light color and the tablet's active thermal mode
Light color Thermal mode
White Balance mode
Blue Quiet mode
Red Performance mode
Purple Custom mode
8 User Guide