Enviro EF THERMO 28 - Manual (Page 7)

Specifications
S
AFETY
D
EVICES
:
Air Bleeder Valve (shown in Figure 3):
Located under unit top of the unit.
To remove the top follow these steps (refer to Figure 4):
1. Open hopper lid and remove the two (2) screws at the
front.
2. Loosen the two (2) screws at the back of the top.
3. Remove top.
4. Replace the top by using the reverse of the method
used to remove it.
Refer to Figure 5 and 6 for the following safety devices.
See next page to remove cabinet sides.
7
��������
������ �����
��� ��������
������
����� �����������
����� ������
�����
����������
WARNING: DO NOT TAMPER, REMOVE, OR BYPASS
THE FOLLOWING SAFETY DEVICES. DOING SO
COULD RESULT IN PROPERTY DAMAGE, BODILY
INJURY OR EVEN DEATH.
Low Pressure Switch: Located behind right cabinet side.
Water Temperature Limit Switch: Located behind right
cabinet side.
Pressure Relief Valve: Located behind left cabinet side.
��� ������� �����
Figure 3
Figure 4
Figure 5 Figure 6