Epson TM-S1000 - Manual (Page 21)

Chapter 1 Product Overview
21
1
Reading Operation
The reading operation for the single feed models when using the driver differs depending on the
following conditions.
*
1
: Judgements of the following items can be enabled with the driver.
∗Magnetic waveform detection result
∗MICR “?” detection result
∗IQA result
Settings with an application are available only for the confirmation mode.
Driver/Application
settings*
1
Franking/Eject
process setting
Reading operation
High-speed
mode
All disabled Regardless The scanner processes a
document without stopping
from feeding it until ejecting it.
One or more enabled Both disabled
Either or both enabled After reading a document, the
scanner stops processing
before ejecting it and restarts
processing depending on the
reading result.
Confirmation
mode
w/o overlap
All disabled Regardless After reading a document, the
scanner stops processing
before ejecting it and waits for
a command from a PC to
restart processing.
One or more enabled Regardless