Epson TM-S1000 - Manual (Page 51)

Chapter 1 Handling
51
4
Processing Documents
The TM-S1000 is capable of performing the following four actions on a document in a single
pass: scanning the image of both the face and the back, reading magnetic characters, and
franking.
Flow of Single Pass Processing
1
Insert a document into the feeder section. (See "Inserting Checks" on page 52 .)
2
The scanner scans the images of the face and back.
3
The scanner reads the magnetic characters on the document.
4
The franking section prints a pattern.
5
The document is fed to the outlet. (See "Ejecting Checks" on page 54 .)
Important Notes on Processing Documents
• Use paper that meets the scanner specification. (See " Paper Specifications" on page 33.)
• Do not use copy paper or other multi-ply paper.
• Make sure that the documents have no curl, bending (especially on the corners), warpage, or
wrinkles.
• Do not use checks with paper clips, staples, adhesive tape, or other foreign materials attached.
• Do not open the covers while processing is in progress.
3
4
5
1
2