NiSi V7 100mm Filter Holder Kit with True Color NC Circular Polarizer and Lens Cap - Manual (Page 5)

Clips
Knob
Locking
wheel
Screw
Front
Slot for adapter
Filter holder
Three
fixed points
Back
3. 支架下方的兩個固定點對準後座固定槽，向
右拉起拉柱，合位後放下拉柱。
固定槽
拉柱
3
2. 將鎖緊撥輪往下旋轉，使撥輪轉至最左邊，
處於UNLOCK狀態。
2
鎖緊撥輪
5. 將鎖緊撥輪往上旋轉，使撥輪轉至最右邊，
將支架鎖死。
5
鎖緊撥輪
4. 把方形鏡片插入片夾槽內並確保鏡片可
自由上下拉動後即可開始攝影創作。
如鏡頭口徑不是82mm，應先
在鏡頭上安裝對應口徑轉接環，
再進行A或B的安裝步驟。
1. The holder is available for filters 100mm wide and 2mm thick.
Please purchase additional clips when using filters of other thicknesses.
2. The holder is made entirely of aluminum. Expect sounds when rotating the holder.
3. The holder can accommodate 1 circular filter and 3 square filters.
More clips can be added for more filters but this will result in vignetting.
4. The holder kit includes a 82mm main adapter, 67mm, 72mm and 77mm adapter
rings. Additional adapter rings 49, 52, 55, 58 and 62mm are sold individually.
1. 把主撥盤安裝在鏡頭上。