Before using this product, Product care – FujiFilm XF 200mm f/2 R LM OIS WR Lens with XF 1.4x TC F2 WR Teleconverter Kit User Manual

Page 19

Advertising
background image

EN-4

ENGLISH

Before Using This Product

The lens may not perform as expected and
some features may not be available with older
versions of the camera fi rmware. Be sure to up-
date the camera fi rmware to the latest version.
Instructions on viewing the camera fi rmware
version and updating camera fi rmware are
available from the following website:

http://www.fujifilm.com/support/digital_cameras/
software/#firmware

If you do not have access to a computer, sup-
port is available from the local distributor
listed in the “FUJIFILM Worldwide Network”
material provided with your camera.

Product Care

• When using a lens hood, do not pick up or

hold the camera using only the hood.

• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from the

glass surfaces of the lens or fi lter. To remove
smudges and fi ngerprints, apply a small
amount of lens cleaner to a soft, clean cotton
cloth or lens-cleaning tissue and clean from
the center outwards using a circular motion,
taking care not to leave smears or touch the
glass with your fi ngers.

• Never use organic solvents such as paint

thinner or benzene to clean the lens.

• Attach the front and rear caps when the lens

is not in use.

• Store the lens and fi lter in cool, dry locations to

prevent mold and rust. Do not store in direct
sunlight or with naphtha or camphor moth balls.

• Keep the lens dry. Rusting can cause irrepara-

ble damage. Wipe off rain and water droplets.

• Leaving the lens in extremely hot locations

could cause damage or warping.

• Note that depending on the positions of the

camera and tripod, the hand holding the
camera grip may contact the tripod or tripod
collar foot when the camera is rotated.

Advertising