Epson EB-W8D - Manual (Page 15)

13
Name Function
A
Audio input port Can be connected to the audio output port of the connected video device or a computer.
s
p. 48, 49
B
Video input port Can be connected to the ordinary image output port of a video device.
s
p. 48
C
Computer input port Can be connected to the RGB output port of a computer.
s
p. 46
D
HDMI input port Connects an HDMI-format video device or a computer to the unit.
s
p. 49
E
Component input port Can be connected to the component (YCbCr or YPbPr) output port of a video device.
s
p. 49
F
Speakers Support the virtual surround sound system.
s
p. 54
G
Mic Input Port Connects to a microphone.
s
p. 53
H
Power inlet port Connect the power cable.
s
p. 18
I
Digital Coaxial Audio-Out
port Can be connected to an audio device with a digital coaxial audio input port.
s
p. 54
J
USB port Connects a USB 1.1-based USB memory or a multicard reader to play the MP3/WMA, JPEG,
DivX
®
and other format storages.
s
p. 47
K
Air exhaust vent The air outlet of the unit after cooling.
Caution
Do not block the exhaust vents, and do not touch the exhaust vent immediately after projecting, or
while projecting, since it becomes hot.
L
Storage feet Used when placing the unit in an upright position. When storing the unit in an upright position,
place it on a stable surface with the storage feet at the bottom. Be sure to place the unit in the
storage case supplied with the unit so that no dust enters the air intake vent.
M
Remote control light-
receiving area Receives signals from the remote control.
s
p. 16
N
USB port (Type B) Connects the projector to a computer with a commercially available USB cable, and the image on
the computer is projected.
s
p. 42
Rear
K
F
N
A
B
H
C
D
F
I
E
G
M
L
J