Epson EB-W8D - Manual (Page 52)

50
This unit automatically detects input signals and changes the projected image.
The projector automatically detects signals being input from connected equipment, and the image being input from the
equipment is projected.
You can project the target image quickly as input ports with no image signal being input are ignored when you change by
pressing the .
1
Open the lens cover and press .
2
Turn the device power switch on, and press the [Play] or
[Playback] button on the video device.
3
Press to start detecting input signals.
When two or more pieces of equipment are connected, press the
until the target image is projected.
To return to the standard built-in DVD player
Make any of the following operations.
• Press .
• Insert a disc into the disc slot.
• Select “DVD/USB” by pressing
.
• Press .
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is available,
or when no image signal can be found. You can select the input port where
the equipment you want to use is connected. If no operation is performed
after about 10 seconds, the screen closes.
Projecting images from external video equipment or a computer