Dynacord IPX5:4 4-Channel Network Power Amplifier (4 x 1250W at 4 Ohms) - Manual (Page 9)

IPX Series DSP Multichannel Networking Power
Amplifier
System overview | en 9
Bosch Security Systems, Inc. Installation manual 2018.04 | 01 | F.01U.330.705
3 System overview
3.1 Application area
The IPX series power amplifiers are designed to power professional loudspeaker systems in fix
installed audio applications such as e.g. stadiums, arenas, houses of worship, concert halls,
theaters and other applications that require a high-power multichannel amplifier with
sophisticated speaker processing.
3.2 Features
IPX5:4 features
– 4 x 1250 W multichannel installation DSP amplifier with digitally controlled PFC supply
– Fully integrated DSP with native 96 kHz and FIR Drive technology
– Dante and OCA integration via OMNEO with fallback options
– Parallel, Bridge and Parallel-bridge modes with 70/100/140/200 V and low impedance
operation
– High efficiency Eco Rail technology for lower operating costs
IPX10:4 features
– 4 x 2500 W multichannel installation DSP amplifier with digitally controlled PFC supply
– Fully integrated DSP with native 96 kHz and FIR Drive technology
– Dante and OCA integration via OMNEO with fallback options
– Parallel, Bridge and Parallel-bridge modes with 70/100/140/200 V and low impedance
operation
– High efficiency Eco Rail technology for lower operating costs
IPX10:8 features
– 8 x 1250 W multichannel installation DSP amplifier with digitally controlled PFC supply
– Fully integrated DSP with native 96 kHz and FIR Drive technology
– Dante and OCA integration via OMNEO with fallback options
– Parallel, Bridge and Parallel-bridge modes with 70/100/140/200 V and low impedance
operation
– High efficiency Eco Rail technology for lower operating costs
IPX20:4 features
– 4 x 5000 W multichannel installation DSP amplifier with digitally controlled PFC supply
– Fully integrated DSP with native 96 kHz and FIR Drive technology
– Dante and OCA integration via OMNEO with fallback options
– Parallel mode with 70/100/140 V and low impedance operation
– High efficiency Eco Rail technology for lower operating costs
3.3 Unpacking and inspection
Carefully open the packaging and take out the power amplifier. Inspect the power amp’s
enclosure for damages that might have happened during transportation. Each amplifier is
examined and tested in detail before leaving the manufacturing site to ensure that it arrives in
perfect condition at your place. Please inform the transport company immediately, if the
power amplifier shows any damage. Being the addressee, you are the only person who can
claim damages in transit. Keep the cardboard box and all packaging materials for inspection
by the transport company.