P160, Troubleshooting – Onkyo TX-NR7100 9.2-Channel THX-Certified Network AV Receiver User Manual
Page 160
160
Troubleshooting
Cannot transmit from this unit to a Bluetooth wireless technology enabled device (wireless
headphones, etc.)
•
Check that the "Bluetooth Transmitter" setting on this unit is set to either "On(Tx)" or "On(Main + Tx)".
Cannot connect this unit to a BLUETOOTH wireless technology enabled device (wireless
headphones, etc.)
•
Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled.
•
Initialize the pairing information and perform pairing again.
Firstly delete all the pairing information saved on this unit. In the Setup menu, select "5. Hardware" - "Bluetooth" - "Bluetooth Transmitter" -
"Pairing Information", then press ENTER while "Clear" is displayed.
Next, delete the pairing information of this unit that is saved on the BLUETOOTH wireless technology enabled device. For information on how to
clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual.
Finally, perform pairing again. Refer to "Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices" (
) for
pairing instructions.
Music playback is unavailable on the unit even after successful BLUETOOTH connection
•
If the volume setting on this unit or the Bluetooth wireless technology enabled device is low, audio may not be played. Check the volume setting
on this unit or the Bluetooth wireless technology enabled device.
•
Some Bluetooth enabled devices may be equipped with a Send/Receive selector switch. Try switching the setting to suit the application the
device is being used for.
• Depending on the characteristics or specifications of the BLUETOOTH enabled device, music may not be played back on this unit.
Sound is interrupted
•
There maybe a problem with the BLUETOOTH enabled device. Check the information on a web page.
The audio quality is poor after connection with a BLUETOOTH enabled device
•
The BLUETOOTH reception is poor. Move the BLUETOOTH enabled device closer to the unit, or remove any obstacle between the
BLUETOOTH enabled device and this unit.