3rd drop, 4th drop, Trigger – Miops Splash Water Drop Kit User Manual

Page 10

Advertising

Delay: This parameter is used to de ne the delay between the second drop and the rst drop. The
unit is in milliseconds. For example, if you set the delay to 120, the second drop will be released 120
milliseconds later than the rst drop.

You can set the drop size to zero if you don't want to drip the second drop.

9.3. 3rd Drop:

This screen is used to set the third drop if needed. It has two parameters.

Drop Size: This parameter is used to set the size of the drop. The unit is in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.

Delay: This parameter is used to de ne the delay between the third drop and the second drop. The
unit is in milliseconds. For example, if you set the delay to 120, the third drop will be released 120
milliseconds later than the second drop.

You can set the drop size to zero if you don't want to drip the third drop.

9.4. 4th Drop:

This screen is used to set the third drop if needed. It has two parameters.

Drop Size: This parameter is used to set the size of the drop. The unit is in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.

Delay: This parameter is used to de ne the delay between the fourth drop and the third drop. The
unit is in milliseconds. For example, if you set the delay to 120, the fourth drop will be released 120
milliseconds later than the third drop.

You can set the drop size to zero if you don't want to drip the fourth drop.

9.5. Trigger:

This screen is used to set the output behavior of your device. It has 2 parameters:

Delay: This parameter is used to de ne the delay between the last drop and triggering of the ash
or the camera. The unit is in milliseconds. For example, if you set the delay to 100, the ash or







Advertising