1st drop, 2nd drop – Miops Splash Water Drop Kit User Manual
Page 9
Advertising
9.1. 1st Drop:
This screen is used to set the rst drop. It has a single parameter.
Drop Size: This parameter is used to set the size of the drop. The unit is in milliseconds. So if you set
the drop size to 50, the valve will be open for 50 milliseconds.
Drop size cannot be zero for the rst drop as a single drop is a minimum requirement for the water
drop photography.
9.2. 2nd Drop:
This screen is used to set the second drop if needed. It has two parameters.
Drop Size: This parameter is used to set the size of the drop. The unit is in milliseconds. For example,
if you set the drop size to 50, the valve will be open for 50 milliseconds.
Advertising