Extron electronic IPL T S Series - Manual (Page 32)

Connection and Configuration, cont’d
IPL T S Series • Connection and Configuration 3-8
Figure 3-7 — Executing the ARP command
3 . To confirm the new IP address is active, perform a ping command to the new
IP address.
example: C:\>ping 10.13.197.64
If the IP address setting was successful, the device replies 3 or more times:
Reply from <IP address>: bytes=32 time <1ms TTL=64
Configuration using Global Configurator
Global Configurator (GC) is a simple-to-use, yet comprehensive software
application that allows non-programmers to configure a wide range of Extron IP
Link-enabled products. GC provides an integrated environment for defining A/V
control and monitoring system functionality from an easy-to-use graphical user
interface. It’s simple enough to be used for configuring a single room controller,
yet powerful enough to facilitate building a Web-based asset management and
remote monitoring system for hundreds of A/V devices in multiple locations.
Serial ports on the IPL T S Series devices can be configured using GC.
Global Configurator is available free from www.extron.com.
To download Global Configurator:
1 . Open and Internet browser and advance to www.extron.com.
2 . Click the Download tab.
3 . Click the Global Configurator icon.
4 . Click the Download Now button.
5 . Complete the Personal Information form.
6 . Scroll down the page and review any related Technical Bulletins.
7 . Click the Download GCSW2XX.exe button.
8 . Follow the remaining system prompts.