Document Outline

• How to Use This Manual
• Introduction
• Conventions
• Contents
• Chapter 1 Scanner Overview
  • 1.1 Main Features
  • 1.2 Parts and Functions
    • fi-7600
    • fi-7700/fi-7700S
    • Common Parts for All Models
  • 1.3 Turning the Power ON/OFF
    • How to Turn the Power ON
    • How to Turn the Power OFF
  • 1.4 Opening/Closing the ADF
    • How to Open the ADF
    • How to Close the ADF
  • 1.5 Opening/Closing the Document Cover [fi-7700/fi-7700S]
    • How to Open the Document Cover
    • How to Close the Document Cover
  • 1.6 Adjusting the Position of the ADF [fi-7700/fi-7700S]
  • 1.7 Setting Up the ADF Paper Chute (Feeder)
  • 1.8 Setting Up the Stacker
  • 1.9 Power Saving Mode
  • 1.10 Basic Flow of Scanning Operation
  • 1.11 Bundled Software
    • Overview of the Bundled Software
    • System Requirements
    • Installing the Bundled Software
• Chapter 2 How to Load Documents
  • 2.1 Loading Documents in the ADF
    • Preparation
    • How to Load Documents
  • 2.2 Placing a Document on the Flatbed [fi-7700/fi-7700S]
  • 2.3 Documents for Scanning
    • Paper Size
    • Paper Type
    • Paper Weight (Thickness)
    • Documents That Cannot Be Scanned Successfully
    • Documents That Cannot Be Scanned
    • Precautions
    • Loading Capacity
    • Area Not to Be Perforated
    • How to Load Documents with a Tab or Non-Rectangular Documents
    • Conditions for Multifeed Detection
    • Conditions for Mixed Batch Scanning
    • Conditions for Automatic Page Size Detection
• Chapter 3 How to Use the Operator Panel
  • 3.1 Operator Panel
    • Names and Functions
    • Indications on LCD
    • Indicator
  • 3.2 Settings Menu
    • How to Use Settings Menu
    • Items Configurable in the Settings Menu
  • 3.3 Function Selection
    • How to Use the Function Selection
    • Item Configurable in Function Selection
• Chapter 4 Various Ways to Scan
  • 4.1 Summary
  • 4.2 Scanning Documents of Different Types and Sizes
    • Scanning Documents with Different Widths
    • Scanning Documents Folded in Half
    • Scanning Documents such as Envelopes or Multi-Layered Transfer Paper
    • Long Page Scanning
    • Scanning a Book [fi-7700/fi-7700S]
  • 4.3 Advanced Scanning
    • Using a Button on the Scanner to Start Scanning
    • Feeding Documents Manually in the ADF
    • Sorting the Images Scanned in Simplex Scanning Mode in the Same Order in Which the Images Scanned in Duplex Scanning Mode Are Arranged [fi-7700S]
    • Scanning Documents with the Document Cover Open [fi-7700/fi-7700S]
  • 4.4 Customizing the Scanner Settings
    • Ignoring Multifeed for a Set Pattern
    • Disabling Paper Protection for a Single Scan After Paper Protection Is Set Off
• Chapter 5 Daily Care
  • 5.1 Cleaning Materials and Locations that Require Cleaning
    • Cleaning Materials
    • Location and Frequency
  • 5.2 Cleaning the Outside
    • fi-7600
    • fi-7700/fi-7700S
  • 5.3 Cleaning the Inside
    • Cleaning the ADF (with Cleaning Paper)
    • Cleaning the ADF (with Cloth)
    • Cleaning the Flatbed [fi-7700/fi-7700S]
• Chapter 6 Replacing the Consumables
  • 6.1 Consumables and Replacement Cycles
  • 6.2 Replacing the Brake Roller
  • 6.3 Replacing the Pick Roller
• Chapter 7 Troubleshooting
  • 7.1 Paper Jam
  • 7.2 Error Indications on Operator Panel
    • Temporary Errors
    • Device Errors
  • 7.3 Troubleshooting
    • Scanner cannot be powered ON.
    • The LCD or the [Power] button light or both switch OFF.
    • Scanning does not start.
    • Scanning takes a long time.
    • Image quality is poor.
    • Quality of scanned text or lines is unsatisfactory.
    • Images are distorted or not clear.
    • Vertical streaks appear on the scanned image.
    • An error (error code "U0:10", "U4:40" or "U5:4A") is already displayed in the LCD after power-on.
    • Multifeed error occurs frequently.
    • Situation in which the document is not fed into the ADF occurs frequently.
    • Paper protection is set off frequently.
    • Paper jams/pick errors occur frequently.
    • Scanned images turn out elongated.
    • A shadow appears at the top or the bottom of the scanned image.
    • There are black traces on the document.
    • Cannot connect the scanner and a computer via a USB cable.
  • 7.4 Before You Contact the Scanner Service Provider
    • General
    • Error Status
  • 7.5 Checking the Product Labels
    • Location
• Chapter 8 Operational Settings
  • 8.1 Starting Up the Software Operation Panel
  • 8.2 Password Setting for the Software Operation Panel
    • Setting a Password
    • Setting [View Only mode]
    • Exiting [View Only mode]
    • Changing the Password
    • Clearing the Password
    • Resetting the Password
  • 8.3 Configuration Items
    • Device Setting
    • Device Setting 2
  • 8.4 Settings Related to Sheet Counters
    • Checking and Resetting the Sheet Counters
    • Scanner Cleaning Cycle [Cleaning Cycle]
    • Replacement Cycle of Consumables [Life Counter Alarm Setting]
  • 8.5 Settings Related to Scanning
    • Adjusting the Position to Start the Scan [Offset Setting/Vertical magnification Adjustment]
    • Removing Shadows/Streaks that Appear around the Scanned Image [Page Edge Filler (ADF)]/[Page Edge Filler (FB)] (fi-7700/fi-7700S)
    • Removing a Color from the Scanned Image [Dropout color]
    • Shortening the Scanning Intervals [Pre-Pick]
    • Number of Paper Feeding Retries
    • Document Feed Speed [Pick Speed]
    • Cropping the Image Boundary [AutoCrop Boundary]
    • Protecting the Documents from Being Damaged [Paper Protection]
    • Specifying the Sensitivity Level for Paper Protection [Paper Protection Sensitivity]
    • Scan Setting for Documents with Tabs or Non-Rectangular Documents [Scan Setting for Document with Tab (Automatic Page Size Detection)]
    • Adjusting the Paper Picking Pressure [Pick Pressure]
    • Adjusting the Output Result for Overscan [Overscan Control]
    • Scanning at High Altitude [High Altitude Mode]
    • Setting the Image Quality for Scanning [Image Quality Mode]
    • Low-speed Scan at Lower Resolution [Low-speed Feed Mode]
    • Specifying the Paper Ejecting Speed [Stacking Control]
  • 8.6 Settings Related to Multifeed Detection
    • Specifying a Multifeed Detection Method [Multifeed]
    • Specifying the Area to Detect Multifeed [Document check area specification for Multifeed Detection]
    • Specifying an Area Not to Detect Multifeed [Intelligent Multifeed Function]
  • 8.7 Settings Related to Waiting Time
    • Waiting Time in Manual Feeding [Manual Feeding]
    • Waiting Time for the Scanner to Enter Power Saving Mode [Power saving]
  • 8.8 Settings Related to Power ON/OFF
    • Method of Turning the Scanner ON/OFF [Power Switch Control]
  • 8.9 Settings Related to Scanner Maintenance
    • Detecting Vertical Streaks [Vertical Streak Detection]
    • Specifying the Sensitivity Level for Vertical Streak Detection [Vertical Streak Sensitivity]
    • Scanner Maintenance and Inspection Cycle [Maintenance and Inspection Cycle]
• Appendix
  • A.1 Basic Specification
  • A.2 Installation Specification
  • A.3 Outer Dimensions
    • fi-7600
    • fi-7700/fi-7700S
  • A.4 Scanner Options
  • A.5 Uninstalling the Software
  • A.6 Notes on Repackaging [fi-7700/fi-7700S]
    • Fixing the Transport Lock
    • Fixing the ADF
    • Installing the ADF Paper Chute (Feeder) and the Stacker
• Contact for Inquiries
• Glossary
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • H
  • I
  • L
  • M
  • O
  • P
  • R
  • S
  • T
  • U
  • V