Kodak A3 Flatbed Accessory - Manual (Page 7)

4 A-61563/Part No. 7J3981October 2010
Using the flatbed Use the flatbed to scan documents that cannot be scanned using the
automatic document feeder (ADF).
1. Open the flatbed cover.
2. Place the document face down on the glass platen.
3. Align the document in the lower right-hand corner at the corner
arrows.
4. Close the flatbed cover.
5. Start scanning. You can scan the document using the Start button
on the flatbed or scanner; or use the desired application.
NOTE: For Kodak i4000 Series Scanners: To wake up the scanner and
the flatbed from Energy Star press any button on the Operator
Control Panel of the scanner.