Kodak A3 Flatbed Accessory - Manual (Page 9)

6 A-61563/Part No. 7J3981October 2010
Cleaning the flatbed The flatbed’s glass platen can collect fingerprints and dust. Use
Staticide Wipes for
Kodak Scanners (CAT No. 896 5519) and the
Optics Cleaner pad (CAT No. 868 3724) to clean the glass platen.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information.
1. Open the flatbed cover.
2. Wipe the glass platen with a Staticide wipe.
3. Dry the glass platen with the Optics Cleaner pad.
4. Close the flatbed cover.
IMPORTANT: Do not spray or pour cleaning liquids on the flatbed’s
glass platen, as these liquids may seep under the glass
and cause damage.
A4 Flatbed
Accessory
If you have an A4 Flatbed, the Kodak Black Background Accessory is
available. CAT No. 863 6870.
When changing the background cover on the flatbed, there is a switch
on the back of the flatbed. You must move the switch to match the color
of the background cover (black or white). Therefore, if you are using the
white background cover, move the switch to the “white” position.