Anti-theft lock, Installing the wire lock, P.32 – Epson EB-825 User Manual

Page 32

Advertising
background image

B

Select either Full Lock or Partial Lock.

C

Select Yes when the confirmation message is displayed.

The Control panel buttons are locked according to the setting you
chose.

q

You can release the Control panel lock by one of the following
two methods.

• From the Remote Control, select Off in Settings - Control Panel

Lock

from the Configuration Menu.

• Press and hold down the [Enter] button on the Control panel

for about seven seconds, a message is displayed and the lock is
released.

Anti-Theft Lock

As the projector is often setup on ceiling mounts and left in rooms
unattended, the projector includes the following security devices to
prevent someone from taking the projector.

• Security slot

The Security slot is compatible with the Microsaver Security System
manufactured by Kensington. You can find details about the
Microsaver Security System on the Kensington homepage

http://

www.kensington.com/

.

• Security cable installation point

A commercially available theft-prevention wire lock can be passed
through the installation point to secure the projector to a desk or pillar.

Installing the wire lock

Pass an anti-theft wire lock through the installation point.
See the documentation supplied with the wire lock for locking instructions.

Security Functions

32

Advertising
This manual is related to the following products: