Epson EB-825 - Manual (Page 9)

Front/Top
Name Function
A Air exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust
vent and do not put your face or hands near the
vent while projection is in progress.
B Remote Receiver Receives signals from the remote control. s Quick
Start Guide
Name Function
C A/V mute slide knob Slide the knob to open and close the A/V mute slide knob.
D Foot adjust lever Pull out the Foot adjust lever to extend and retract the
Front adjustable foot. s Quick Start Guide
E Front adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s Quick Start Guide
F A/V mute slide knob Slide shut when not using the projector to protect the
lens. By closing during projection you can hide the
image and the sound (A/V Mute). s Quick Start
Guide , s
p.19
G Air intake vent
(Air filter) Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature to
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly. s
p.67 , p.72
H Air filter cover open/
close switch Opens and closes the air filter cover. s p.72
Open this cover when installing the optional Wireless
LAN unit.
I Security cable
installation point Pass a commercially available wire lock through here
and lock it in place. s
p.32
J Security slot The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s p.32
K Focus ring Adjusts the image focus. s Quick Start Guide
L Zoom ring Adjusts the image size. s Quick Start Guide
M Control panel s p.12
N Lamp cover Open this cover when replacing the projector's Lamp.
s p.69
Part Names and Functions
9