Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 301)

VIVOTEK
User's Manual - 301
© 2020 VIVOTEK INC. All Right Reserved
146
NAME VALUE SECURITY
(get/set) DESCRIPTION
Bit 7 => Support digital signature of
package
Bit 8 => Support snapshot
Bit 9 => Support upload encrypted
package
vadp_npackage <positive integer> 0/7 Indicate the maximum number of
VADP package that can be uploaded
to the device.
camctrl_httptunnel
<Not support
anymore>
<boolean> 0/7 Indicate whether to support
httptunnel.
* Not support this parameter
anymore when the version number
(httpversion) is equal or greater than
0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
camctrl_ptztunnel <boolean> 0/7 Indicate whether to support
ptztunnel.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the
security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP
© 2020 VIVOTEK INC. All Right Reserved
147
NAME VALUE SECURITY
(get/set) DESCRIPTION
tunnel for UART transfer.
transmission_mod
e Tx,
Rx,
Both 0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
network_dualmod
e <boolean> 0/7 Indicate whether network dual mode
is supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0305a.
wireless_s802dot1
1b <boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot1
1g <boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_s802dot1
1n <boolean> 0/7 Indicate whether to support wireless
802.11n.
wireless_begincha
nnel 1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchann
el 1 ~ 14 0/7 Indicate the end channel of wireless
network
wireless_encrypt_
wep <boolean> 0/7 Indicate whether to support wireless
WEP.
wireless_encrypt_
wpa <boolean> 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt_
wpa2 <boolean> 0/7 Indicate whether to support wireless
WPA2.
wireless_apmode_
enable <boolean> 0/7 Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is