Emerson Radio ES1 - Manual (Page 21)

20
5. Press the Play/Pause button to begin programmed Playback. The MEMORY indicator stops
flashing and playback begins on the first track you selected. The CD index display will show which
tracks have been programmed and the current track indicator flashes.
If you press the Skip/Search / buttons during programmed playback, the player will skip to
the next/previous track in the program memory.
When the last programmed track has played, the CD stops and the display shows the total tracks
and playing time of the disc. But the MEMORY indicator remains on and the program remains in the
memory. If you press the Play/Pause button, the program will begin again.
To cancel the program from the Memory:
After the disc has stopped – press Stop button once.
When the disc is playing – press Stop button twice. The MEMORY indicator disappears from the
display.
The program will also be cancelled from the Memory when the CD door is opened.
RANDOM PLAYBACK
Press the Random button to play all the tracks on a disc in random order. The RANDOM indicator
appears in the display. Press the Play/Pause button to begin playback if necessary. After each track
has played once, the player stops.
To cancel random playback, press the Random button until the RANDOM indicator disappears, or open
the CD door.
TUNER OPERATIONS USING THE REMOTE CONTROL
The following tuner features and functions can be operated by the remote control:
MANUAL TUNING
Each time you press either the tuning Up or Down buttons on the remote control, the tuner
display moves up and down by one step (200 kHz). Repeatedly press either the tuning Up or
Down buttons on the remote control until the exact frequency of your desired station appears on
main display.
Use the manual tuning method when you want to tune in stations that are not strong enough to be
tuned by the automatic tuning method. The manual tuning method will allow you to tune to any
frequency on the AM and FM bands.
AUTOMATIC TUNING
Depress and hold either the tuning Up or tuning Down buttons on the remote control until the
display begins to scan up or down and then release the buttons. The tuner will automatically stop
on the next receivable station. Repeat this operation until the display indicates the exact frequency
of your desired station.