Emerson Radio ES1 - Manual (Page 27)

26
SLEEP TIMER OPERATION
This unit incorporates a sleep timer which allows you to listen to radio or CD while you fall asleep
and then the system will shut off automatically. The Sleep timer can be set for as few as 10 minutes
or for as long as 2 hours (120 minutes) before shutting off automatically.
To operate the Sleep Timer, proceed as follows:
1. Select the desired mode, Tuner or CD, and adjust the volume, preset EQ, and X-BASS controls
as desired.
2. Press the Sleep button on the main unit or on the remote control handset. The SLEEP indicator
and the number 10 (minutes) appear in the display. This indicates that the unit will turn off
automatically after 10 minutes.
3. To increase the amount of time before auto turn-off, continue pressing the Sleep button. Each
time you press the Sleep button, the amount of sleep time will increase by 10 minutes, up to a
maximum of 2 hours (120 minutes). If the Sleep button is pushed again while 120 minutes
appears on the display, it will revert back to 10 minutes.
4. After 5 seconds, the Sleep time indication disappears and the display returns to either radio
frequency or CD Track/Time display. However, the SLEEP indicator remains in the display to
confirm that the unit is in the Sleep/Timer mode.
5. After the Sleep Timer counts down to zero, the unit shuts off automatically and returns to the
Standby mode.
To shut the unit off before the Sleep Timer counts down to “00”, press the Power button to return the
unit to the Standby mode. The SLEEP indicator disappears from the display.