Western Digital WD 2TB 3D NAND SATA III 2.5" Internal SSD (Retail) - Manual (Page 22)

9 Physical Specifications
SATA 2.5"/7mm Cased Form Factor
The SATA 2.5"/7mm cased form factor complies with the SFF-8201 and SFF-8223
specifications.
Parameter Specification
Width 69.85mm ± 0.25mm
Length 100.20mm ± 0.25mm
Thickness 7.0mm ± 0.2mm/-0.5mm
Typical Weight ▪ 250GB: 37.4g
▪ 500GB: 37.4g
▪ 1TB: 37.4g
▪ 2TB: 59.7g
Mounting Screws M3 x 0.5 non-self-tapping or thread forming
Maximum Screw Penetration 3.5mm (0.138")
Screw Torque (nominal/max) 4kgf-cm/7kgf-cm
The figure below is enlarged to show detail, but is not the actual size of the form
factor. This figure shows 2.5"/7mm cased full form factor (for 1TB and 2TB
capacities only).
The figure below is enlarged to show detail, but is not the actual size of the form
factor. This figure shows 2.5"/7mm cased one-half form factor (for 250GB and
512GB capacities only).
Physical Specifications
WD Blue 3D NAND SATA SSD
User Manual
17