Western Digital WD 2TB 3D NAND SATA III 2.5" Internal SSD (Retail) - Manual (Page 37)

Command Name ATA8 Code
Security Set Password O F1h
Security Unlock O F2h
Seek Obs 7Xh
Set Features M EFh
Sub-command: Enable write cache 02h
Sub-command: Set transfer mode 03h
Sub-command: Enable Advanced Power Management
(APM) 05h
Sub-command: Enable SATA features 10h
Sub-command: DMA Setup FIS Auto-Activate Optimization 02h
Sub-command: Device-initiated power state transitions 03h
Sub-command: Software Setting Preservation 06h
Sub-command: Device Sleep 09h
Sub-command: Disable read look-ahead 55h
Sub-command: Disable reverting to power-on defaults 66h
Sub-command: Disable write cache 82h
Sub-command: Disable Advanced Power Managment (APM) 85h
Sub-command: Disable SATA features 90h
Sub-command: DMA Setup FIS Auto-Activate Optimization 02h
Sub-command: Device-Initiated Interface Power
Management 03h
Sub-command: Software Setting Preservation 06h
Sub-command: Device Automatic Partial-to-Slumber
transitions 07h
Sub-command: Device Sleep 09h
Sub-command: Enable read look-ahead AAh
Sub-command: Enable reverting to power-on defaults CCh
Set Multiple Mode Obs C6h
Sleep Retired/M 99h/E6h
Smart O B0h
Sub-command: Read Attribute Values (Read Data) D0h
Sub-command: Read Attribute Thresholds Obs D1h
Sub-command: Enable/Disable Attribute Autosave Obs D2h
Sub-command: Save Attribute Values D3h
Sub-command: Execute Offline Immediate D4h
Sub-command: Execute Short Self-test routine (Offline) 01h
Sub-command: Execute Extended Self-test routine (Offline) 02h
Supported ATA Commands
WD Blue 3D NAND SATA SSD
User Manual
32