Introduction, General description, Key features – Western Digital WD 2TB 3D NAND SATA III 2.5" Internal SSD (Retail) User Manual

Page 7: 2 introduction, General description key features

Advertising
background image

2

Introduction

This product manual describes the functional, mechanical, and interface

specifications

for the WD Blue

3D NAND SATA SSD (solid-state drive).

General Description

The WD Blue 3D NAND SATA SSD delivers high performance and reliability with low

power consumption in large capacities. It is based on state-of-the-art BiCS3 64L

TLC (triple level cell)

flash

technology and incorporates the proven tiered caching

architecture designed to improve responsiveness for corporate and consumer

workloads.
The WD Blue 3D NAND SATA SSD is optimized for the demanding power

management requirements of Ultrathin and small form factor products. It features

Device Sleep (DEVSLP), more frequent use of low-power modes, and fast transitions

between various power modes.
The WD Blue 3D NAND SATA SSD also features a robust error-handling mechanism

technology which uses a page-level striping with distributed parity for an added

layer of data protection. This mechanism thus recovers errors, without interrupting

user data

flow

that other traditional error correction mechanisms cannot.

Available in either a SATA 2.5”/7mm cased or an M.2 2280 form factor, the WD Blue

3D NAND SATA SSD offers drive capacities of 250 gigabyte

1

(GB), 500GB, 1

terabyte

2

(TB), and 2TB.

Key Features

▪ Flash Technology

BiCS3 64L 3D TLC

▪ Unformatted Capacities

3

250GB

500GB

1TB

2TB

▪ Form Factors

SATA 2.5”/7mm cased: complies with SFF-8223 and SFF-8201

M.2 2280-S2-B-M

4

: complies with PCI Express M.2 (NGFF) Electromechanical

Specification,

rev. 1.0

1

1 gigabyte (GB) = 1 billion bytes. Some of the drive capacity is used for formatting and

other functions and is not available for data storage.

2

1 terabyte (TB) = 1 trillion bytes. Available in both the 2.5”/7mm cased and M.2 2280

form factors.

3

Logical capacity of the drive conforms to the IDEMA HDD

Specification.

See

www.idema.org for details. A portion of the drive capacity is not available for data

storage. 1 gigabyte (GB) = 1 billion bytes. 1 terabyte (TB) = 1 trillion bytes.

4

250GB, 500GB, and 1TB comply with 2280-S2-B-M, while 2TB complies with 2280-S3-B-

M.

Introduction

WD Blue 3D NAND SATA SSD

User Manual

2

Advertising