Alto Professional Alto TS412 2500W 12" 2-Way Active Loudspeaker with Bluetooth - Manual (Page 45)

45
TS412
Output Power 2500 W peak (1600 LF + 900 HF) 1250 W continuous RMS (800 LF + 450 HF)
Drivers Low-Frequency : 12.0” driver, 2.5” (63 mm) high-temperature voice coil. 1 x 800 W RMS @ 2
Ω .
High-Frequency : 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω .
Crossover Frequency 2 kHz
Maximum SPL 132 dB (peak), 129 dB (continuous) (dB-SPL @ 1 m)
Frequency Response 53 Hz – 20 kHz (+/-3 dB)
Frequency Range 44 Hz – 20 kHz (-10 dB)
Horn Coverage 90° horizontal x 60° vertical (nominal)
Connectors (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
(1) XLR output (Link)
(1) IEC power cable input
Bluetooth Operating Frequency 2402 MHz – 2480 MHz
Input Impedance Line: 20 K Ω balanced, 10 K Ω unbalanced, Mic : 1.2K
Line Gain/Volume Control Range - ∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
Mic/Inst. Gain/Volume Control
Range: - ∞ to +50 dB
USB Charging Port 5V 2.1A
Controls Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume
control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Indicators (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Red = Ch1/2 Limiter)
(1) Bluetooth LED (Blue)
(1) Link LED (Orange)
(4) DSP Presets LED (Green)
(3) HPF LED (Green)
Power Connection : IEC
Voltage : 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption : 1100W
Fuse : 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
Protection Electronic clip, thermal, and transducer overdrive protection
Enclosure Injected Molded Enclosure and Perforated Metal Grille
Mounting / Installation Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a
wedge monitor position
Operating Temperature -10°C to 45°C (14°F to 113°F)
Dimensions
(height x width x depth)
23.9” x 13.9” x 13.8” / 606.5 x 353.5 x 350.5 mm
Weight 33 lbs. / 15 kg